Product
FIRST
RHODEN
. LIGHT TRUCK BIAS
Conveyor
H.K.R CONVEYOR BELTING
(A) TOP COVER:
Any thickness from 1/32" to 1 7/8"
(B) CARCASS:
1 to 10 plies
(C) SKIMS:
Heavy thickness from 1/32" to 11/2"
(D) BOTTOM COVER:
Any thickness from1/32" to 1 1/2" Bare back also avaible
(E) EDGE:
Molded edge(seal edges) or cutedge
FEATURES OF H.K.R CONVEYOR BELTING
1. longer lifeatlower cost. 5. Complete efficiency of vulcanized splice.
2. High adhesion. 6. Proper load support
3. Cut edge construstion 7. Highestreisitance to mildewand moisture.
4. Excellent efficiency of vulcanized splice. 8. Highest resistance to impactand material trapping.

COVER AND FABRIC DESCRIPTION OF COVER GRADES
TYPE
 APPLICATION
Grade "C"Rubber
 Standard general purpose fore conomical installationsof moderateseverity in production lin,Grainconveyringcementplant, gravel pitandgeneral industry, It is widelyused. Its tensile strengthis above 1800 lbs/in2, elongation over 400%.
Grade "B"Rubber (RAM II)
 Similar to grade "C", But modified for ardous conditions "such as tough abrasion, heavy loading and severe flexing on long hauls, its tensile strength is above 2500 lb/in2, and Elongation over450%.
Grade "A"Rubber (RAM I)
 Similar to grade "B", But modified for special severe conditions ,Its tensile strength is above 3200 lbs/in2, Elongation over 480%.
Heat Resistant Rubber ".H.R."
 Designed for carrying very hot abrasive materials in the temperature range from 200oF to 300oF.
Special Heat Resistant "S.H.R."
 For severe temperature from 300oF to 450oF
Oil Resistant Rubber "O.R."
 Specially compounded for resistance to mineral oils and grease.

FABRIC SPECIFICATION
CODE
CONSTRUCTION
WARP
TENSILE STRENGTH
ALLOWABLE WORKING TENSION
APPOX GAUGE PER PLY
(IN BELT)
Warp
Weft
lb/in-py
kg/cm-ply
lb/in-ply
kg/cm-ply
inch

m/m
CC-55
Cotton
Cotton
310
55
31
5.5
0.050
1.25
CC-65
Cotton
Cotton
367
65
36
6.5
0.050
1.25
NN-100
Nylon
Nylon
560
100
56
10.0
0.048
1.10
NN-150
Nylon
Nylon
840
150
84
15.0
0.048
1.20
NN-200
Nylon
Nylon
1120
200
112
20.0
0.052
1.30
NN-250
Nylon
Nylon
1400
250
140
25.0
0.056
1.40
NN-300
Nylon
Nylon
1680
300
168
30.0
0.057
1.45
NN-400
Nylon
Nylon
2230
400
223
40.0
0.060
1.55
EP-100
Polyester
Nylon
560
100
56
10.0
0.048
1.10
EP-150
Polyester
Nylon
840
150
84
15.0
0.048
1.20
EP-200
Polyester
Nylon
1120
200
112
20.0
0.052
1.30
EP-250
Polyester
Nylon
1400
250
140
25.0
0.056
1.40
EP-300
Polyester
Nylon
1680
300
168
30.0
0.057
1.45
EP-400
Polyester
Nylon
2230
400
223
40.0
0.060
1.55

Category by construction of fabric and rubber type.
Type
Features
Max. Mfg. Width
Heavy-Duty, Light-Duty Black Rubber Conveyor Belt
For wide range of Heavy & Light application with good troughability, excellent abrasion resistant, low elongation and outstanding adhesion between plies.
1800mm
Oil Resistant Conveyor Belt
Special oil resistant compound belt good for carrying materials coated with oil or grease.
1800mm
Standard Heat Resistant Conveyor Belt
For carrying material up to 200 deg. C ( 400 deg. F ) with belt surface temperature up to 100 deg. C (Approx. 200 deg.F) ( top and button rubber cover no less than 3.2mm and 1.6mm respectively)
1800mm
High Temperature Resistant Conveyor Belt (EPDM)
Special "First" EPDM compounds good for carrying material up to 400 deg. C (approximate 750 deg. F) with belt surface temperature up to 200 deg. C (Approx. 400 deg.F) ( top and button rubber cover no less than 6mm and 2mm respectively)
1800mm
Flame Retardant Conveyor Belt
Special compounded belt with flame-extinguishing properties. Belts are custom manufacture according to various international standards such as MSHA and SABS upon request.
1800mm
Chemical Resistant Conveyor Belt
Rubber compounds are designed to resist chemicals such as acid or alkali materials.
1800mm
Static, Oil & Flame Resistant Conveyor Belt (SCORF)
Excellent conductive compounds to reduce the risk of sparks caused by static.
1500mm
Transmission Belt
Round or cut edge are available. High-tension, high flexibility 32oz cotton duck makes excellent performance for light duty drives and elevators.
1200mm
Elevator Belt
(Super Flat Belt)
Made with special solid woven fabric which minimizes elongation, withstand heat and fatigue. Excellent application for vertical transport of grains, sands and other similar loose powdery types.
1500mm

Incline Belting
Type
Features
Max. Mfg. Width
Multi-Chev Belt
Chevron Conveyor belting is used to convey wet and/or loose materials up steep inclines. The V-shaped chevron cleats prevent or reduce slide back and increase the amount of product moved by quick pick-up at the point of lading.(Applicative Angle of inclination from 17o to 28o)
1050mm
Roughtop Belt
Roughtop Belt enables product to be conveyed on inclines. The high grip impression eliminates slide-back of packages, cartons and other product. (Applicative angle of inclination from 20o to 30o)
1500mm
M-shaped Ribs Belt
Cross corrugated peaks are equivalent to small cleats. will convey on high incline. M-shaped ridges are soft. yet durable and will self clean as they go around pulleys.
1200mm
Multi-Chev Belt
Roughtop Belt
M-shaped Ribs Belt
Company Name: Hsing Kwo Rubber Mfg. Co. Ltd.
Address:596, Sha Tien Rd., 1 Sec. Ta-Tu,Taichung Hsien, Taiwan
Capital:
 USD7,000,000
Employee: 350 staff
Area: 100,000 M2
Establish: 1945 ( In 1996 certified by ISO 9001 for quality assurance)
Tel:886-4-26934811
Fax:886-4-26934743
E-mail:sales.hkr@msa.hinet.net